Network project Although LOGO! Was mainly designed to replace conventional switching technology, the LOGO! Family offers some interesting communication options. Due to the transition to the Ethernet port as standard programming interface, the current communication modules generally have a different method to connect to the basic units. In previous generations up to LOGO!

The KNX standard – the basics 2. Vices bearing either the KNX or the EIB logo are mutually compatible. What is the tion in operating costs. Energy-Efficiency-With-KNX_se.pdf (1 MB) Energy-Efficiency-With-KNX_tw.pdf. Expansion modules, and about their compatibility with the previous 0BA0-0BA5 versions. 2.4.2 Putting a CM EIB/KNX into operation 51.

7, communication modules were connected via the LOGO! Backplane bus and therefore took up address space in the process image of the inputs/outputs. 8, the connection is done via Ethernet.

This means the entire address space of the inputs/outputs remains available for digital and analog signals. Ethernet opens up completely new communication options based on TCP/IP by using the SIMATIC S7 protocol: • LOGO! Modules with each other • LOGO! With all SIMATIC S7 controllers • LOGO! With SIMATIC HMI devices • LOGO! With communication modules As part of the transition to the Ethernet port as standard programming interface, the LOGO!

PC cable is replaced with a standard Ethernet cable. The new TDE is also connected via standard Ethernet cable. All basic units with Ethernet port can be operated on WLAN via corresponding access points. This means they can be programmed, monitored and controlled remotely. Integrated web server – it couldn’t be easier The integrated web server in all LOGO!

8 basic units is used for monitoring and control the LOGO! Via WLAN and the Internet. The web server provides: • Simple configuration via mouse click • Compatibility with all conventional browsers, without the need for programming experience in HTML • Required view identical to the LOGO display or the TDE display • Operation of LOGO! Aplikasi Pemutar Musik Android Terbaik 2017. 8 via smartphone, tablet or PC • Same look and feel as on the display of LOGO! 8 or the TDE Easy step up steps: • open the message text function block, select the tickbox of the web server in the user program and transfer the program to the LOGO! • then allow access of the web server online via LOGO!

Soft Comfort and protect it with a password • establish a WLAN connection of the LOGO! 8 via an access point • connect your smartphone, tablet or PC to the accesspoint and monitor or control your LOGO! Communication options LOGO! To SIMATIC S7 • LOGO! To SIMATIC HMI • LOGO! Via WLAN (via external router) • Modbus protocol TCP/IP client and server (starting with FS:04) • Time synchronisation via NTP server (starting with FS:04) • LOGO!

Via Internet Yes Yes - • LOGO! Web server - based on - customer specific projectable (starting with LOGO! 8.2) Yes - - You can increase the number of Ethernet ports with the LOGO!

This Ethernet 4-port switch allows to set up cost-efficient, small local Ethernet networks. Communication via communication modules The LOGO! Family offers several communication modules for the communication with external system. The connection is done via the backplane bus up to generation LOGO! Between LOGO! 8 and communication modules the connection is done exclusively via Ethernet. New with LOGO!

8 is SMS communication for alarming and remote control via cell phone using the LOGO! It automatically sends out alarm messages via SMS. The CMR can also read control commands from a SMS and transfer them to LOGO! The same module supports position detection and clock synchronisation via GPS, for example, for cost-effective container tracking and position reporting via SMS to a control center.

CMR can synchronize the time worldwide with LOGO! CSM is a Ethernet 4-port switch, that can be used to expand the number of Ethernet ports to set up small local Ethernet networks. Modular Communication modules LOGO! 6 CMR 2020 / CMR 2040 (via Ethernet) Yes - - CSM 12/24V (in LOGO! 8 design, via Ethernet) Yes Yes - CSM 230V (in LOGO! 7 design, via Ethernet) Yes Yes - CMK 2000 (KNX via Ethernet) Yes - - KNX (via backplane bus) - Yes Yes AS-interface (via backplane bus) - Yes Yes.

CMR communication module The CMR (Communication Module Radio) for LOGO! 8 has 3 typical areas of application: 1.

Communication with LOGO! 8 via SMS (GSM) for alarms, process monitoring and control directly from the mobile terminal unit 2. GPS position detection 3. Time synchronization of LOGO! 8 via NTP server or GPS LOGO!

Call Of Duty 6 Modern Warfare 2 For Pc. CMR supports remote communication via the mobile network with LOGO! This means distributed plants can be monitored and controlled with SMS or alarm messages can be triggered from LOGO! Typical applications: • Fill level or temperature monitoring, alarms on limit violations • Change of setpoints • Control of blinds, lights, pumps or irrigation systems, etc. Via SMS • LOGO! As control unit for clocks in church towers or schools and regular time synchronization • Container tracking: Position data and additional information, such as the current temperature values in a container, are queried from the LOGO! Station via SMS and transmitted with the LOGO! The CMR module offers the following features: • Configuration via integrated web interface • Up to 20 messages to different groups of recipients • Address book with 20 phone numbers • Query of specific process values, for example, meter readings, temperature, pressure, etc.